Features

Previous
Next

WIPE-ON GLASS - SELF-DISINFECTING

Through wet wipe application, LIQUID GUARD® preserves and therefore retains the value of any item. Additionally, the invisible seal of antimicrobial nano coating protects your most valuable assets: health and well-being.

ANTIBACTERIAL

Broad antibacterial activity (incl. multi-resistant bacteria)

ANTIVIRAL

Proven efficacy against SARS-CoV-2 and other enveloped viruses like Influenza A

PREVENTS ODORS

Prevents microbial odors

FUNGICIDAL

Permanent fungicidal function

DEFENDING MITES

Deprives house dust mites of food

PREVENTS MOLD GROWTH

Prevents mold growth on smooth and textured surfaces

FACILITATES CLEANING

Faciliatates cleaning and removal of limescale, soot, grease, dust etc.

PROMOTES COMFORT

Promotes comfort, well.being, and safety

FREE FROM SVHC

Especially free from fluorine, PBT & vPvB substances.

DERMATOLOGY TESTED​

Rating of 'excellent'

SAFE FOR BABIES

Meets the requirement for food contact articles/materials.

FREE FROM SVHC

Especially free from fluorine, PBT & vPvB substances.

APPLICATION & SELF-DISINFECTING EFFECT

  • By forming an ultra-thin layer of glass, LIQUID GUARD® protects, among other things, against micro-scratches. Under mechanical abrasion, the protective layer is abraded before the substrate is damaged. A unique GLIDE function, ensures that any abrasive contact materials glide over the treated surface and leave fewer traces.
  • The surface is first cleaned and polymerized (step 1).
  • Subsequently, the modified silica delivers a safe and permanent antimicrobial function (step 2).
  • A non-migrating antimicrobial glass layer is created. For certification and use in food contact sectors, national or local law must be observed.
  • LIQUID GUARD® is suitable for all water-resistant surfaces*.
  • To meet the highest demands of test standards in the supply chain, color coding confirms the antimicrobial agents level of performance.
* Do not use if safe application is in doubt.
  • LIQUID GUARD® creates an invisible physical barrier to destroy microbes
  • Protected surfaces act as a layer of swords to defend against microbial growth
  • The positively charged atom of nitrogen attracts negatively charged cell membranes and punctures all microbes
  • This physical kill terminates the life of the microbe
  • This effect has been shown to be non-mutagenic in opposite to other active substance like Triclosan

SPECIFICATIONS

Weight:
N/A
Chemical Basis:
a modified silica created a non-migrating antimicrobial glass layer
Layer Thickness:
Ca.150-300nm
Water Resistance:
slightly hydrophobic
Temperature Stability:
150 degree Celsius
Chemical Stability:
solvent-resistant
Weatherproof:
2000h according to ISO 11507 A (corresponds to circa 3-4 years
Resilience: (Mechanical)
Glass. ceramic > 40,000 cycles according to ISO 11998 (cleaning with water)
Noble metals > 20,000 cycles according to ISO 11998 (cleaning with water)
Plastics > 5,000 cycles according to ISO 11998 (cleaning with water)
Salt Water Resistant:
Yes
Transparency:
100%
Storage Stability:
1 year
Temperature Sensitivity:
3 to 40 degree Celsius

Usage:

Spray: Approximately 10ml/m² for Cleaner + Primer and Liquid Guard spray

Application (Hard Surfaces):

Step 1: Apply Liquid Guard Cleaner & Primer to the target area. Make sure the solution is evenly distributed. Wait 1 minute, then remove excess solution.

Step 2: Apply Liquid Guard Germany Antimicrobial & Water-Repellent Coating to the surface, making sure to spread the solution evenly. Wait 1 minute, then remove excess solution.

Note: To avoid visible marks, never leave the solution on the surface for too long without wiping it off.

Step 3: After 2 minutes the surface should be buffed using the microfiber wipe/cloth until all visible streaks disappear. A thorough polishing will be necessary, especially on transparent or shiny surfaces.

After 6 hours the coating is hardened and ready for use.

Application (Textile) :

Step 1: Apply Liquid Guard Germany: For Textile to the target area. Make sure the solution is evenly distributed.

Step 2:Allow the Liquid Guard Germany to sit on your textile item for 6 hours. That’s it!

Now your item, is liquid guard protected and ready for use.

Compatible Surfaces:

Liquid Guard® can be used on these surfaces:
Glass
Ceramics
Oxidation resistant metals
Plastics, made from e.g. PMMA, ABS, ECTFE, HDPE, LDPE, PA, PC, PMP, PP, PS, PVC, SAN or SI
Varnishes
Printed cardboards and wrapping

Incompatible Surfaces:

Liquid Guard CANNOT be used on these surfaces:
Surfaces in contact with foods
Water-sensitive surfaces, such as e.g. paper If you’re unsure whether our products are suitable for any surface, please do not use it.

Sizes:

100 ml

HAZARDS

DANGER

H411 Toxic to aquatic life with long lasting effects.

P273 Avoid release to the environment.

P280 Wear protective gloves.

P404 Store in a closed container.

P501 Dispose of contents/container in accordance with local/regional/national/international regulation.

APPLICATION VIDEO