Menu
Menu
UC-DDH-100M
UC-DDH-300M
UC-DDH-600M
UC-DDH-1000M
9.6 Liters/Day
48 Liters/Day
84 Liters/Day
180 Liters/Day
Water Pipe
Water Pipe
Water Pipe
Water Pipe
30m3/hr
110m3/hr
200m3/hr
400m3/hr
550W
1,800W
3,800W
9,000W
220V, 60Hz
220V, 60hZ
220V, 60Hz
220V, 60Hz
2.8A
8.8A
20A
18A
44.1 x 26 x 37.3cm
68 x 42.4 x 37.5
50.4 x 42 x 86.6
87.7 x 64 x 123.2
12.5kg
14.5kg
35kg
160kg
UV Care Desiccant Rotary Dehumidifier is a technology that let air pass thru a honeycomb desiccant rotor (wheel) that features a large active dehumidification surface. The rotor is constructed of a fire retardant substrate impregnated with a high concentration of Silica Gel, resulting in a high adsorption capacity (ability to adsorb water molecules).
The humid air passes thru 75% of the rotor area, after that the air will be at a much lower moisture content due to the moisture extracted and absorb by the silica gels.
The dry air will be discharge to the room.
In order for this drying process to continue, the machine will discharge the wet air onto the outdoor area. In the same time the fresh reactivated air, will be heated up to a maximum of 120°C by a heater to dry the running rotor.
Due to the high air velocity, moisture does not condense in side the device, but it is blown out in the form of hot water vapor then discharged out through the duct.
1. Has three times longer life span than regrigerated dehumidifiers.
2. Works well in low dew point environment (working ambient temperature 10~55°C)
3. Silica gel adsorption wheel is washable, recyclable for environment protection.
4. Reduce humidity below 10% (Depending on model)
5. Precise control of room humidity range.
6. Automatic/manual mode, automatic ON/OFF according to the room humidity
7. 1-24-hour timer switch
© 2022 Intech Group. All rights reserved.
© 2023 Intech Group. All rights reserved.